No Products in the Cart
Find out more on the Naim Audio New Zealand Website
First designed by Naim Audio founder Julian Vereker in 1971, the NAP 200 has Naim Audio musicality written into its DNA. As our first production amplifier, no single product encapsulates our philosophy better. Its design is simple and uncompromising, with a single-minded focus on one thing: creating an enduring musical connection with the listener.
More recently the NAP 200 has benefitted from the years of research that went into the NAP 500amplifier. Many of the developments from the 500 Series project have helped to revitalise its electronic design and componentry bringing significant and hard-earned gains to performance. Beneath this new technology however, it retains the values which helped to make it an icon: simplicity, focus and sheer musicality.
New Technology
The NAP 200 has been revitalised and reintroduced in 2015 with the addition of a Naim Audio DR (Discrete Regulator) module to power its partnered Naim Audio preamplifier. This comes alongside small improvements to some internal componentry and layout that combine to lift its musical performance even further than the original.
Like the flagship NAP 500, the NAP 200 uses a new circuit design with improved earthing arrangements built on a very high quality, anti-resonance main audio circuit board. Anti-vibration, resonance-controlling feet serve to protect the sensitive internal components from microphonic vibration and unwanted external interference.
A new, top-quality 430VA toroidal transformer provides more than 300VA of transient power. Separate windings provide dedicated left and right channel rectified power supplies with two smoothing capacitors per channel. The NAP 200 also has a separate winding providing a preamplifier power supply. This enables it to be used in a two-box amplifier configuration with a Naim Audio preamplifier such as the NAC 202. The Naim Audio NAP 200 is stable into any load and can drive a 2-ohm load for long periods of time.
Audio Inputs | |
---|---|
Analogue Input |
1 x 4-pin DIN |
Input Impedance |
18kΩ |
Audio Outputs | |
Gain |
+29dB |
Frequency Response |
-3dB at 3Hz - 50kHz |
Power Outputs |
Naim pre-amplifier |
Minimum Load Impedance |
2Ω |
Speaker Outputs | |
Speaker Outputs |
L & R, 4mm “banana” sockets |
Power Output |
70W/channel, 8Ω |
Transient |
300VA |
Power | |
Mains Supply |
100V, 115V, 230V; 50 or 60Hz |
Power Consumption |
11VA |
Physical | |
Dimensions (HxWxD) |
87 x 432 x 314 mm |
Weight |
11.6 kg |
Shipping Dimensions |
240 x 590 x 500 mm |
Shipping Weight |
14.2kg |
Finish | |
Front |
Brushed and black anodised |
Case |
Black powder coated |
Shipping and Delivery Policy
Delivery is within New Zealand only, using Toll New Zealand unless otherwise specified. We do not ship outside New Zealand.
Our shipping rates are:
We are as transparent as possible about our shipping prices and delivery times, however, there are many variables that will affect the shipping rate, especially when shipping large items or shipping to rural locations. Please feel free to call us about your particular needs on 04 385 8353.
Estimated Delivery Time:
Orders are generally dispatched within 1-2 business days after your order and payment have been received. Please feel free to contact us for more information.
Orders are dispatched from our warehouses in either Wellington or Auckland. Delivery times may vary to each location. As a general guide, please see below.
Please note that the above times are for general (non-Christmas) periods - contact us for Christmas period delivery estimates.
Other Information:
All our products are supplied by New Zealand based Distribution companies, so all warranties are supported within New Zealand. On rare occasions the distributor may be out of stock or a product has become obsolete and there are no more available in New Zealand to replace your unit, so there may be a shipping wait for a replacement to arrive from overseas. If no replacement can be sourced then either an alternative product or credit will be offered.